Haku löysi 23 tulosta
- Ma 21.01.2013 14:07
- Keskustelualue: English forum
- Aihe: om603 into w123
- Vastaukset: 3
- Luettu: 34349
Re: om603 into w123
I've build a OM603 in a w123. On the passenger side I have the original engine mounts if the om603. I took a 10mm thick steel plate and drilled holes so it would fit on the engine side. Then i took the engine mount and drew trough the holes on the 10mm steel plate. Them I threaded it m8 treads. The ...
- Pe 14.09.2012 21:28
- Keskustelualue: English forum
- Aihe: Bulding a om603 tips
- Vastaukset: 43
- Luettu: 107779
Re: Bulding a om603 tips
Wow... That's quite a big difference... If i buy a engine with no heads and stuff i'll upgrade them to. By the way, i've bought the kkk k29 turbo. It was just 150 euro's and i saw dieselmeken using it on a merc. Spools up nice. If it doesn't work out i'll get rid of it and search for a better turbo....
- Ke 05.09.2012 00:21
- Keskustelualue: English forum
- Aihe: Bulding a om603 tips
- Vastaukset: 43
- Luettu: 107779
Re: Bulding a om603 tips
I can actually upgrade my injectors to a higher opening pressure. My boss can help me with that. He has some stuff and an box full of shims (? Those "whashers" with different thickness) to adjust opening pressure. But for now they wil probally work fine... Got some more future plans. First...
- Ti 04.09.2012 23:43
- Keskustelualue: English forum
- Aihe: Bulding a om603 tips
- Vastaukset: 43
- Luettu: 107779
Re: Bulding a om603 tips
Yeah hx40 super was my first choice too. But I somehow came across the k29. The engine will be a turbo om603 eventually. The problem is it's kinda expensive here and I want to know if i can get the car to run good. By the way.... Are heads and everything the same? I belive so... That means i can pro...
- Ti 04.09.2012 22:07
- Keskustelualue: English forum
- Aihe: Bulding a om603 tips
- Vastaukset: 43
- Luettu: 107779
Re: Bulding a om603 tips
That's true ;) but i'll be fitting a turbo engine if the rods bend I can get a k29 turbo for not much money. Is it a better option compared to the hx40? I dont know anything about those turbo's. Also i'm moving from to another place to fit my car lift. I realized this is far to expensive and i'm mov...
- Ke 29.08.2012 22:00
- Keskustelualue: English forum
- Aihe: Bulding a om603 tips
- Vastaukset: 43
- Luettu: 107779
Re: Bulding a om603 tips
Runs like a dream again
No smoke untill i rev it up i think no rods have bend. Because i'll probally notice when they are just slightly bend. I mean white smoke and misfires
No smoke untill i rev it up i think no rods have bend. Because i'll probally notice when they are just slightly bend. I mean white smoke and misfires
- Ke 29.08.2012 00:45
- Keskustelualue: English forum
- Aihe: Bulding a om603 tips
- Vastaukset: 43
- Luettu: 107779
Re: Bulding a om603 tips
Yeah, i hope so to. Just talked to a mercedes mechanic (a internet friend of my) he said the rod's don't bend that easily. They can take quite a beat. He only saw it once, where a leaky injector caused a bend rod. Story seems a bit weird cause there's not enough fuel in one stroke to fill up partly ...
- Ti 28.08.2012 23:03
- Keskustelualue: English forum
- Aihe: Bulding a om603 tips
- Vastaukset: 43
- Luettu: 107779
Re: Bulding a om603 tips
The banjo bolt check valve is something like this: http://www.ultimategarage.com/shop/part.php?cPath=34_277&products_id=3668" onclick="window.open(this.href);return false; Its on the backside of the pump. The return fuel line connects to it. I tought it would be weird to set a pump pas...
- Ti 28.08.2012 22:45
- Keskustelualue: English forum
- Aihe: Bulding a om603 tips
- Vastaukset: 43
- Luettu: 107779
Re: Bulding a om603 tips
Oops... It is after tdc. :lol: http://www.peachparts.com/Wikka/OM603InjectionPump" onclick="window.open(this.href);return false; Well... Ill try tomorrow. If it still doesnt run good the rod's are probally bent :lol: i feel like a idiot. Anyhow now there's no excuse for a 300 turbo engine....
- Ti 28.08.2012 22:34
- Keskustelualue: English forum
- Aihe: Bulding a om603 tips
- Vastaukset: 43
- Luettu: 107779
Re: Bulding a om603 tips
No pressure on cooling system.
By banjo check valve i mean the bolt with the little ball in it between the engine and pump. Or is this a one-way valve?
Are you sure after tdc? 48 degrees off timing it could never run that good?
I agree with the bend rod's it's got the same symptons
By banjo check valve i mean the bolt with the little ball in it between the engine and pump. Or is this a one-way valve?
Are you sure after tdc? 48 degrees off timing it could never run that good?
I agree with the bend rod's it's got the same symptons
- Ti 28.08.2012 22:06
- Keskustelualue: English forum
- Aihe: Bulding a om603 tips
- Vastaukset: 43
- Luettu: 107779
Re: Bulding a om603 tips
Pump timing is set at 24 degrees before tdc. I used the markings on de side of the pump. The weird thing is it ran perfectly. Nice idle and no smoke. No knocking either. I didn't touch it. And the next day is ran very bad. By connecting rod's you mean the engine rods under the piston? I doubt. I fou...
- Ti 28.08.2012 19:49
- Keskustelualue: English forum
- Aihe: Bulding a om603 tips
- Vastaukset: 43
- Luettu: 107779
Re: Bulding a om603 tips
Yay! Got it running! The first 2 starts it ran like a dream. But yesterday it didn't suddenly run wel. No idle and a lot of white smoke. Weird. Its almost like the pumptiming changed somehow. Getting on it right now It's getting hot very fast and al lot of metalbanging (don't know the english word f...
- To 02.08.2012 21:34
- Keskustelualue: English forum
- Aihe: Bulding a om603 tips
- Vastaukset: 43
- Luettu: 107779
Re: Bulding a om603 tips
Anyone here who knows the pressure of de automatic lifting pump? And is there a continuous flow from the pump? Or is there some safety valve in it? I'm thinking to make the lifting system electric like citroën. For two reasons. 1 the space (it wil touch the radiator and 2nd the orriginal pump (on th...
- To 26.07.2012 18:51
- Keskustelualue: English forum
- Aihe: Bulding a om603 tips
- Vastaukset: 43
- Luettu: 107779
Re: Bulding a om603 tips
Thanks guys :thumbup: The engine is in. The driveshaft fits, but the mount on the gearbox didn't. I've taken the plate under the engine rubber of the w124 and drilled 2 extra holes. Fits beatifully. The enginemounts are done and its 100% level. The radiator has moved to the right a bit to make room ...
- To 12.07.2012 18:29
- Keskustelualue: English forum
- Aihe: Bulding a om603 tips
- Vastaukset: 43
- Luettu: 107779
Re: Bulding a om603 tips
Yes is actually a non turbo pump, but i don't mind some smoking. I've bought it seperatly The mercedes is all original. The interriour look nice aswel. A small hole in the driversseat is the only thing. I thougt he said that he wanted to keep the alloy wheels, but that's ok. I got some nice rims fro...
- Ti 10.07.2012 17:37
- Keskustelualue: English forum
- Aihe: Bulding a om603 tips
- Vastaukset: 43
- Luettu: 107779
Re: Bulding a om603 tips
wow, 700 hp.... nice... do you have a link of that video? I don't expect any major problems fitting the engine, i've found more video/pictures of people making the 6 cil diesel swap. Personaly i like fitting thinks that don't fit :lol: Working in a pump is a lot harder for me because of the little t...
- To 05.07.2012 19:45
- Keskustelualue: English forum
- Aihe: Bulding a om603 tips
- Vastaukset: 43
- Luettu: 107779
Re: Bulding a om603 tips
It worked. I got the elements out! I'll order the elements right away in that german webshop. The w123 station with the scania turbo was the reason why I wanted to build a car like that. It was the first superturbo video of a merc i ever saw. And after i've heard how easy it was I became more excite...
- Ti 03.07.2012 22:09
- Keskustelualue: English forum
- Aihe: Bulding a om603 tips
- Vastaukset: 43
- Luettu: 107779
Re: Bulding a om603 tips
Ahh thnx dude. I've noticed little holes in the lifters. That will probally be the holes to pin the screwdrives or little pins in. Now that i'm close to buying a car and i look at those youtube movies it gets me really motivated and excited.
Siekkinen, you owe me a beer
Siekkinen, you owe me a beer
- Ti 03.07.2012 12:48
- Keskustelualue: English forum
- Aihe: Bulding a om603 tips
- Vastaukset: 43
- Luettu: 107779
Re: Bulding a om603 tips
Hey thnx i understand. But there are 4 torx bolts behind it. Those are loose now, but i've given it a few gentle taps with a hammer on the sprocket side of the camshaft. It didn't come off. But i give it a try later again. Oh and i am happy to say i'm going to see a w123 station tommorow. That will ...
- To 01.03.2012 22:00
- Keskustelualue: English forum
- Aihe: Bulding a om603 tips
- Vastaukset: 43
- Luettu: 107779
Re: Bulding a om603 tips
http://img339.imageshack.us/img339/7640/1330621111967.jpg" onclick="window.open(this.href);return false; Anyone who knows how to undo the governer bolt thingy? Its the only thing left to come off. I recently did not do anything to the pump but things are looking great! I actually had a tra...
- Ti 27.12.2011 20:36
- Keskustelualue: English forum
- Aihe: Bulding a om603 tips
- Vastaukset: 43
- Luettu: 107779
Re: Bulding a om603 tips
Ok maybe i'll just get a hx40. Those are plenty avalable. And i can get some more hp. 300 hp? Thats faily common with 7mm and a hx40 i think. I actually got a scrap w124 and took the pump appart. Its fairly easy and after some studying i now know how the thing works. But i now need the 7mm elements....
- Ke 05.10.2011 00:24
- Keskustelualue: English forum
- Aihe: Bulding a om603 tips
- Vastaukset: 43
- Luettu: 107779
Re: Bulding a om603 tips
Thnx for the info! Nice engine you have there! I think i'm going with buying a n/a om603, built the engine. See if I can get it to run good and in the meanwhile look for a turbo om603. Converting to turbo is to much work for me. And probally cost more than a off-the-shelf turbo engine. And n/a engin...
- Ma 03.10.2011 23:33
- Keskustelualue: English forum
- Aihe: Bulding a om603 tips
- Vastaukset: 43
- Luettu: 107779
Bulding a om603 tips
Hi there! Little introduction, i'm rico i'm 21 years old. Working as an mechanic in a local garage. I currently own a audi v8 4.2 nice car but i really love mercedes. And especialy the finnisch superturbo's So i've made the decision to build one. I know i can build it myself. I have he knowledge an ...